|
Assemble Parts
STEP 4
Install Drives
Using the screws that came with the
case, install the floppy disk drive. (If you aren't sure where
it goes, look for the cutout in the front panel of the case.)
Next, make sure the jumpers on your
EIDE hard drive (A), CD-RW drive, and other drives are set
correctly.
Make sure the data and power connectors
on all drives are facing inside the case.
Mount your hard drive (or drives) in
the appropriate location, usually in bays in the middle of the
case near the motherboard. If you have two hard drives,
install the second one next to the primary drive to make
hooking up the cables easy.
For components, such as CD-RW drives,
that you'll need to access from the front of the case, you may
have to attach mounting brackets that came with the case. Some
cases don't require them. When you install the drives, make
sure that their fronts line up with the front of the case (B).
Go On to Step 5... |
