|
Assemble Parts
Part 3
Install the Motherboard in the Case
Screw in the metal standoffs (packed
with the case hardware) that will hold the motherboard in the
case (A).
Carefully slide the board into place (B).
You'll know it's correctly seated when
the mounting holes line up. Using the screws that came with
the case, mount the motherboard. Be careful not to overtighten
the screws, or you may damage the board.
Next, hook up the small connectors for
the case's on/off switch, the reset button, speakers, and the
indicator lights (power and hard disk activity) to the
motherboard. See your motherboard manual for details, and work
carefully.
Finally, connect the large power
connector from the PC's power supply to the motherboard. The
connector will fit only one way.
Go on to Step 4...
|
